光学接着

Industrial Bonding Tapes & Adhesive Films

この技術製品群のECLEARモデル、材料構成、用途、プロセスウィンドウ、検証要件をご確認ください。

代表構成

材料積層構造の内容.

各層は機能順に示しており、正確な構成はグレードごとに異なります。

01PET, tissue, acrylic foam, PE foam, PU foam or carrierless adhesive platform
02Acrylic, silicone, rubber or heat-activated adhesive selected by substrate
03Single-, double- or differential-sided construction
04Paper or film release liner with controlled converting orientation

ECLEAR モデルカタログ

技術選定用の個別グレード.

各 ECLEAR モデルは、異なる材料の役割と構成を示します。製造元グレードとの対応情報は、トレーサビリティーのため ECLEAR 製品マスターで管理されます。

42 / 42 件

ECLEAR モデル製品 / 役割構成 / 代表範囲用途

EC-PT-BB-101製品グレード

50 µm Bio-Based PCR-PET Double-Sided Tape規定グレード

Bio-based acrylic PSA 19 µm / 12 µm 100% PCR-PET / bio-based acrylic PSA 19 µm50 µm functional tape thickness; adhesive bio-based content reported as >70% (75% in the comparison table); percentage basis and certification scope require confirmation

Electronics and appliance component bonding

bio based double sided tapePCR PET adhesive tape

EC-PT-BB-102製品グレード

100 µm Bio-Based PCR-PET Double-Sided Tape規定グレード

Bio-based acrylic PSA 44 µm / 12 µm 100% PCR-PET / bio-based acrylic PSA 44 µm100 µm functional tape thickness; adhesive bio-based content reported as >70% (75% in the comparison table); percentage basis and certification scope require confirmation

Electronics and appliance component bonding

100 micron bio based taperecycled PET double sided tape

EC-PT-TI-101製品グレード

Cost-Effective Tissue Tape Platform技術検討

Tissue carrier / acrylic PSA / release linerPlatform; 120-160 µm range; final grade data not supplied

Control panels, foot pads, foam and plastic parts

EC-PT-TI-111製品グレード

General Tissue Tape Platform技術検討

Tissue carrier / acrylic PSA / release linerPlatform; exact grade thickness not supplied

General appliance and component bonding

EC-PT-TI-112製品グレード

General Tissue Tape Variant 2 Platform技術検討

Tissue carrier / acrylic PSA / release linerPlatform; difference from T915/T9153 not disclosed

General appliance and component bonding

EC-PT-TI-113製品グレード

General Tissue Tape Variant 3 Platform技術検討

Tissue carrier / acrylic PSA / release linerPlatform; difference from T915/T9152 not disclosed

General appliance and component bonding

EC-PT-TI-121製品グレード

Differential Tissue Tape Platform技術検討

Tissue carrier / differential PSA / release linerPlatform; source labels differential; exact sides not disclosed

Different-substrate bonding

EC-PT-TI-131製品グレード

Heat-Resistant Tissue Tape Platform技術検討

Tissue carrier / heat-resistant PSA / release linerPlatform; exact temperature window not supplied

High-temperature appliance assembly

EC-PT-101製品グレード

General PET Double-Sided Tape規定グレード

Acrylic PSA / PET carrier / acrylic PSA / release linerGeneral high-strength PET tape; exact thickness must follow TDS

Die-cut component bonding

PET double sided tapehigh adhesion PET tape

EC-PT-102製品グレード

Curved-Surface PET Tape規定グレード

Acrylic PSA / PET carrier / acrylic PSA / release liner50-100 µm source family; high adhesion and anti-repulsion

Curved surfaces and FPC bonding

anti repulsion PET tapecurved surface bonding tape

EC-PT-103製品グレード

Anti-Repulsion PET Tape規定グレード

Acrylic PSA / PET carrier / acrylic PSA / release liner50-100 µm source family; anti-lifting behavior

Curved surfaces and spring-back components

anti lifting PET tapeanti repulsion adhesive

EC-PT-104製品グレード

High Push-Out PET Tape規定グレード

Acrylic PSA / PET carrier / acrylic PSA / release linerHigh push-out strength; exact thickness follows TDS

Structural component mounting

high push out PET tapehigh shear double sided tape

EC-PT-GP-1xx製品シリーズ

General PET Double-Sided Tape Platform技術検討

Acrylic PSA / PET carrier / acrylic PSA / release linerPlatform only; X denotes thickness or construction; exact P8972G is separate

General permanent component bonding

EC-PT-AR-1xx製品シリーズ

Anti-Repulsion PET Tape Platform技術検討

Acrylic PSA / PET carrier / acrylic PSA / release linerPlatform only; X denotes thickness or construction; exact grades remain separate

Curved and rebound-prone components

EC-PT-HP-1xx製品シリーズ

High Push-Out PET Tape Platform技術検討

High-strength acrylic PSA / PET carrier / acrylic PSA / release linerPlatform only; X denotes thickness or construction; exact P89822G is separate

High push-out structural mounting

EC-PT-LS-1xx製品シリーズ

LSE PET Tape Platform技術検討

LSE acrylic PSA / PET carrier / LSE acrylic PSA / release linerPlatform only; X denotes construction; exact LSE grades remain separate

Low-surface-energy plastics

EC-PT-FPC-1xx製品シリーズ

FPC PET Tape Platform技術検討

Acrylic PSA / PET carrier / acrylic PSA / release linerPlatform only; wildcard is not an orderable grade

FPC permanent bonding

EC-NT-1xx製品シリーズ

Carrierless Acrylic Transfer-Tape Platform技術検討

Acrylic transfer adhesive / release linerPlatform only; wildcard is not an orderable grade; exact N506/N513 variants are separate

FPC, curved-surface and component bonding

EC-NT-101製品グレード

60 µm Carrierless Transfer Tape規定グレード

Acrylic transfer adhesive / standard printed kraft release paper60 µm; standard liner variant

FPC, curved surface and component bonding

60 micron adhesive transfer tapecarrierless acrylic tape

EC-NT-102製品グレード

60 µm Carrierless Transfer Tape, Kraft Liner規定グレード

Acrylic transfer adhesive / brown kraft release paper60 µm; N liner variant

General conformable bonding

60 micron transfer tape kraft liner

EC-NT-103製品グレード

60 µm Carrierless Transfer Tape, White Liner規定グレード

Acrylic transfer adhesive / white release paper60 µm; H liner variant

General conformable bonding

60 micron transfer tape white liner

EC-NT-111製品グレード

130 µm Carrierless Transfer Tape規定グレード

Acrylic transfer adhesive / standard printed kraft release paper130 µm; standard liner variant

FPC and curved surface bonding

130 micron adhesive transfer tape

EC-NT-112製品グレード

130 µm Carrierless Transfer Tape, Kraft Liner規定グレード

Acrylic transfer adhesive / brown kraft release paper130 µm; N liner variant

General conformable bonding

130 micron transfer tape kraft liner

EC-NT-113製品グレード

130 µm Carrierless Transfer Tape, White Liner規定グレード

Acrylic transfer adhesive / white release paper130 µm; H liner variant

General conformable bonding

130 micron transfer tape white liner

EC-FT-AF-1xx製品シリーズ

Acrylic Foam Tape Platform技術検討

Acrylic PSA / acrylic foam / acrylic PSA / release linerPlatform; 200-350 µm; cushioning; low-VOC/solvent-free claim requires approval

Smartphone frame sealing and bonding

EC-FT-AR-1xx製品シリーズ

Reinforced Acrylic Foam Tape Platform技術検討

Acrylic PSA / PET-reinforced acrylic foam / acrylic PSA / linerPlatform; 200-350 µm; stronger adhesion and rework

Frame bonding and sealing

EC-FT-PE-1xx製品シリーズ

Reinforced PE Foam Tape Platform技術検討

Acrylic PSA / reinforced PE foam / acrylic PSA / linerPlatform; 200-350 µm; strong adhesion and rework

Frame, cushion and sealing assemblies

EC-FT-HR-1xx製品シリーズ

Heat-Release PE Foam Tape Platform技術検討

Heat-release acrylic side / PE foam / strong-bond acrylic side / linerPlatform; 250-350 µm; adhesion reduction at 75-80 °C

Repairable smartphone frame bonding

EC-FT-PU-101製品グレード

150 µm Foldable PU Foam Tape規定グレード

Release liner / modified low-modulus acrylic PSA / PU foam / acrylic PSA / release liner150 µm; ≥200,000 folds; 25% tensile 570 kPa; source test values

Foldable-screen cushioning and frame bonding

foldable PU foam tapehinge cushioning tape

EC-FT-PU-102製品グレード

150 µm Embossed Foldable PU Foam Tape参考・データ確認

Release liner / modified low-modulus acrylic PSA / PU foam / acrylic PSA with an air-venting embossed surface / removable embossed liner; side orientation requires drawing confirmationEmbossed air-venting variant; ≥200,000 folds; test table identity requires confirmation

Foldable-screen air-venting and cushioning

EC-LS-101製品グレード

170 µm LSE PET Tape規定グレード

LSE acrylic PSA / PET carrier / LSE acrylic PSA / release liner170 µm; primerless adhesion to low-surface-energy substrates

PP, PE and specialty component bonding

LSE bonding tapePP PE adhesive tape

EC-LS-102製品グレード

150 µm LSE PET Tape参考・データ確認

LSE acrylic PSA / PET carrier / LSE acrylic PSA / release liner150 µm; source suffix differs from P8929LEH

Low-surface-energy plastic bonding

EC-LS-103製品グレード

150 µm LSE PET Tape, H Variant参考・データ確認

LSE acrylic PSA / PET carrier / LSE acrylic PSA / release liner150 µm; H suffix requires confirmation

Low-surface-energy and FPC bonding

EC-LS-1xx製品シリーズ

FPC LSE PET Tape Platform技術検討

Special LSE acrylic PSA / PET carrier / acrylic PSA / linerPlatform; 150-170 µm; wildcard is not an orderable grade

FPC bonding to low-energy substrates

EC-AB-NC-101製品グレード

40 µm Ultra-Low-Tack Carrierless AB Tape規定グレード

Acrylic PSA side / carrierless interface / silicone PSA side / PET linersAcrylic side 800 gf/in; silicone side 1-15 gf/in

Silicone rubber to mixed-substrate bonding requiring easy release

carrierless AB tapelow tack silicone acrylic tape

EC-AB-NC-102製品グレード

40 µm Medium-Tack Carrierless AB Tape規定グレード

Acrylic PSA side / carrierless interface / silicone PSA side / PET linersAcrylic side 800 gf/in; silicone side 100-500 gf/in

Silicone rubber to mixed-substrate bonding

silicone acrylic AB tapecarrierless differential adhesive

EC-AB-DF-101製品グレード

57 µm Silicone/Acrylic Differential Tape規定グレード

Acrylic PSA / PET carrier / silicone PSA / linersSilicone peel 500-1000; acrylic peel 1500-2500 gf/24 mm

Silicone sheet pads and mixed-substrate bonding

silicone surface bonding tapedifferential adhesive

EC-AB-DF-102製品グレード

50 µm Balanced Silicone/Acrylic Differential Tape規定グレード

Acrylic PSA / PET carrier / silicone PSA / linersSilicone peel >500; acrylic peel >700 gf/24 mm

Silicone components and mixed-material assemblies

dual adhesive AB tape

EC-AB-DF-103製品グレード

50 µm High-Bond Silicone/Acrylic Differential Tape規定グレード

High-bond acrylic PSA / PET carrier / high-bond silicone PSA / linersBoth sides >1500 gf/24 mm

High-load silicone-to-plastic or metal bonding

high adhesion silicone tape

EC-LB-1xx製品シリーズ

Display Light-Blocking Tape Platform技術検討

Black PET or functional carrier / pressure-sensitive adhesive / linerPlatform only; no final source grade or optical-density data supplied

LCD/OLED bezel masking and functional-sheet fixation

EC-HM-TS-1xx製品シリーズ

Thermosetting Bonding Film Platform技術検討

Thermosetting heat-reactive adhesive film / release linerPlatform; 60 °C pre-lamination and 80-110 °C final lamination are source guidance, not a frozen grade

Permanent softgoods, textile, leather and semi-structural bonding

EC-HM-GR-1xx製品シリーズ

Ultra-Thin Graphite Bonding Tape Platform技術検討

Single- or double-sided acrylic PSA / ultra-thin PET carrier / linerPlatform; 3-30 µm; wildcard source grade; matte-black option

Graphite-sheet bonding and surface protection

作用原理

Permanent bonding depends on wet-out, stress distribution and interface durability.

01PET double-sided, carrierless transfer, foam, low-surface-energy, differential and light-blocking tapes solve different assembly problems. Carrier thickness, adhesive chemistry, compressibility, color and release construction must stay linked to a specific ECLEAR grade.

02Initial tack is not the same as durable adhesion. Wet-out develops with pressure, dwell and temperature, while surface energy, contamination, plasticizers, curvature and restoring force determine the long-term interface.

03Hot-melt and thermosetting films add temperature, pressure and cure history to the bond design. The finished bondline is qualified for the actual substrate, geometry, load and environmental cycle.

主な特長

用途を基準に評価する性能.

利点は、対象基材、工程、最終アセンブリで評価します。

Thin carrierless tapes for conformable and curved-surface bonding

PET and LSE systems for high shear, anti-lifting and PP/PE interfaces

Foam families for cushioning, sealing, repair and foldable-device support

Differential and heat-activated constructions for dissimilar materials

評価フロー

材料定義から量産積層構造の認定まで.

認定では、材料、加工経路、顧客の生産ラインを一体として確認します。

01Define the joint

Record substrates, bond area, gap, load direction, thickness and rework needs.

02Prepare surfaces

Control cleaning, activation, primer and time before lamination.

03Apply the bond

Set pressure, dwell, alignment and any heat/cure cycle.

04Age under load

Verify peel, shear, creep, lifting, appearance and environmental durability.

検証項目

仕様承認前に収集すべき検証データ.

実使用を代表する基材、工程条件、エージング順序を使用してください。

Peel and dynamic/static shear on both production substrates
Gap filling, compression recovery and edge lift on actual geometry
High/low temperature, humidity, thermal cycling and chemical exposure
Light-blocking, electrical or flame properties where the grade provides that function
Reworkability, residue and damage where controlled removal is required

代表特性

数値には試験方法と承認済み改訂版が必要です.

代表値は選定の参考であり、管理規格は承認済み TDS に従います。

特性代表値 / 範囲管理

ThicknessGrade-specific from ultra-thin to foam constructionsFinished laminate method

Peel / shearSubstrate and dwell dependentTest both sides where differential

LSE bondingPP/PE and low-energy surfacesPrimerless claim requires substrate validation

ActivationPressure, heat or UV by familyUse the named process route

代表値は保証規格ではありません。最終基準は承認済みECLEAR TDSとお客様の検証結果に従います。

よくある質問

ライン試験前に技術者が確認する質問.

サンプル依頼前に、材料の役割、界面、工程範囲を明確にしてください。

Why are similar tape models kept separate?+

A one-letter or thickness change can identify a different carrier, adhesive, side construction, color, release system or application window. ECLEAR does not treat those variants as interchangeable.

Can a high peel value guarantee a reliable device bond?+

No. Peel, shear, creep, impact, gap filling, restoring force and environmental aging represent different failure modes. The joint must be tested in its real geometry.

Can ECLEAR recommend a grade from an application description alone?+

A first shortlist is possible, but a production recommendation requires the substrate, layer construction, equipment, process sequence, test method and acceptance criteria. ECLEAR normally moves from requirement definition to laboratory matching, samples, line trial and a frozen approved specification.

Are the values shown on this page guaranteed specifications?+

No. Website values and constructions are selection guidance. Guaranteed limits, test conditions, packaging and shelf life are controlled only by the latest ECLEAR-approved TDS, quality agreement and customer qualification record.

推奨用途

このプラットフォームを評価する用途.

各用途で、積層構造全体の適合性とライン検証が必要です。

プロセスウィンドウ

管理すべき工程パラメータ.

一つの公称条件だけでなく、工程範囲全体を記録してください。

Identify both substrates, surface energy, roughness and contamination.
Set die-cut geometry, liner sequence, pressure, dwell and temperature.
Test static shear, push-out, spring-back and environmental aging on the assembly.
Define repair or removal requirements before selecting a permanent adhesive.

選定時の確認事項

選定に必要な情報.

これらの情報により、ECLEAR はグレードと検証計画を絞り込めます。

Q1Are both bonding surfaces high-energy, silicone, foam, fabric or LSE plastic?
Q2What bondline thickness, gap filling and cushioning are required?
Q3What shear, push-out, sealing and anti-repulsion targets apply?
Q4Must the joint be permanent, reworkable or heat activated?

主な不具合リスク

計画的な試験で早期に確認すべきリスク.

早期の不具合確認により、量産拡大のリスクと誤った材料比較を低減します。

Selecting by peel alone while ignoring shear and spring-back

Using the wrong adhesive face in a differential construction

Poor wet-out on rough, contaminated or low-energy substrates

Uncontrolled liner changes that alter die-cut or lamination behavior

ダウンロード資料

管理された技術文書.

選定した ECLEAR グレードと用途に対応する最新版を請求してください。

PDF製品資料文書管理審査後に提供請求 →PDF簡易 TDS文書管理審査後に提供請求 →PDFSDS・適合性資料一式文書管理審査後に提供請求 →

代表構成と用途概念は、材料選定のための情報です。供給状況、構成、性能、工程条件はグレードごとに異なり、最新の ECLEAR 承認 TDS、用途試験、および顧客の最終認定に従います。

単一材料ではなく、積層構造全体を検証してください.

適切な提案のため、基材、構成、工程、合格基準をご提示ください。

プロジェクトを開始 ↗

Industrial Bonding Tapes & Adhesive Films

材料積層構造の内容.

技術選定用の個別グレード.

Permanent bonding depends on wet-out, stress distribution and interface durability.

用途を基準に評価する性能.

材料定義から量産積層構造の認定まで.

仕様承認前に収集すべき検証データ.

数値には試験方法と承認済み改訂版が必要です.

ライン試験前に技術者が確認する質問.

このプラットフォームを評価する用途.

管理すべき工程パラメータ.

選定に必要な情報.

計画的な試験で早期に確認すべきリスク.

管理された技術文書.

関連材料システム.

単一材料ではなく、積層構造全体を検証してください.