®機能性フィルム
ディスプレイ保護・製品内に残る機能性フィルム
偏光板やディスプレイの一時保護フィルム、完成品に残る画面保護・飛散防止・加飾フィルム、およびPCR-PET剥離ライナー。光学機能、接着界面、予定する除去工程に応じて構成を選定します。
材料積層構造の内容.
各層は機能順に示しており、正確な構成はグレードごとに異なります。
- 01Optical or recycled-content PET carrier selected by thickness and color
- 02Silicone, PU, acrylic, OCA or release coating matched to the interface
- 03Optional hardcoat, antistatic treatment, air-venting texture or decorative primer
- 04Release liner and removable protection layers defined by the converting sequence
技術選定用の個別グレード.
各 ECLEAR モデルは、異なる材料の役割と構成を示します。製造元グレードとの対応情報は、トレーサビリティーのため ECLEAR 製品マスターで管理されます。
50 / 50 件
ECLEAR モデル製品 / 役割構成 / 代表範囲用途
EC-PL-101製品グレード
Antistatic Polarizer Shipping Protection Film参考・データ確認
38 μm PET / 15 μm PSA / 25 μm release liner53 μm reported functional-film thickness (excluding the separate release liner); transmittance 90.12%; haze 2.19%; peel table 2.56 g/25 mm; adhesive and outer surfaces 10^8–10^10 Ω. Data confirmation required: separate peel curves show 7.4 and 3.8 g/25 mm averages on two polarizers
Temporary shipment protection for polarizers and qualified AG or AR surfaces
EC-PT-RL-101製品グレード
25 µm Transparent PCR-PET Release Liner — <=5 gf/in release · R2 construction confirmation規定グレード
25 µm transparent PCR-PET / release coatingRelease force <=5 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
25 micron PCR PET release liner<=5 gf/in release film
EC-PT-RL-102製品グレード
25 µm Transparent PCR-PET Release Liner — 5-15 gf/in release · R2 construction confirmation規定グレード
25 µm transparent PCR-PET / release coatingRelease force 5-15 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
25 micron PCR PET release liner5-15 gf/in release film
EC-PT-RL-103製品グレード
25 µm Transparent PCR-PET Release Liner — 18-30 gf/in release · R2 construction confirmation規定グレード
25 µm transparent PCR-PET / release coatingRelease force 18-30 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
25 micron PCR PET release liner18-30 gf/in release film
EC-PT-RL-104製品グレード
25 µm Transparent PCR-PET Release Liner — 30-50 gf/in release · R2 construction confirmation規定グレード
25 µm transparent PCR-PET / release coatingRelease force 30-50 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
25 micron PCR PET release liner30-50 gf/in release film
EC-PT-RL-105製品グレード
25 µm Transparent PCR-PET Release Liner — 40-60 gf/in release · R2 construction confirmation規定グレード
25 µm transparent PCR-PET / release coatingRelease force 40-60 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
25 micron PCR PET release liner40-60 gf/in release film
EC-PT-RL-111製品グレード
38 µm Transparent PCR-PET Release Liner — <=5 gf/in release規定グレード
38 µm transparent PCR-PET / release coatingRelease force <=5 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
38 micron PCR PET release liner<=5 gf/in release film
EC-PT-RL-112製品グレード
38 µm Transparent PCR-PET Release Liner — 5-15 gf/in release規定グレード
38 µm transparent PCR-PET / release coatingRelease force 5-15 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
38 micron PCR PET release liner5-15 gf/in release film
EC-PT-RL-113製品グレード
38 µm Transparent PCR-PET Release Liner — 18-30 gf/in release規定グレード
38 µm transparent PCR-PET / release coatingRelease force 18-30 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
38 micron PCR PET release liner18-30 gf/in release film
EC-PT-RL-114製品グレード
38 µm Transparent PCR-PET Release Liner — 30-50 gf/in release規定グレード
38 µm transparent PCR-PET / release coatingRelease force 30-50 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
38 micron PCR PET release liner30-50 gf/in release film
EC-PT-RL-115製品グレード
38 µm Transparent PCR-PET Release Liner — 40-60 gf/in release規定グレード
38 µm transparent PCR-PET / release coatingRelease force 40-60 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
38 micron PCR PET release liner40-60 gf/in release film
EC-PT-RL-121製品グレード
50 µm Transparent PCR-PET Release Liner — <=5 gf/in release規定グレード
50 µm transparent PCR-PET / release coatingRelease force <=5 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner<=5 gf/in release film
EC-PT-RL-122製品グレード
50 µm Transparent PCR-PET Release Liner — <=5 gf/in release · R2 construction confirmation参考・データ確認
50 µm transparent PCR-PET / release coatingRelease force <=5 gf/in; R2 construction not disclosed; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
EC-PT-RL-123製品グレード
50 µm Transparent PCR-PET Release Liner — 5-15 gf/in release規定グレード
50 µm transparent PCR-PET / release coatingRelease force 5-15 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner5-15 gf/in release film
EC-PT-RL-124製品グレード
50 µm Transparent PCR-PET Release Liner — 18-30 gf/in release規定グレード
50 µm transparent PCR-PET / release coatingRelease force 18-30 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner18-30 gf/in release film
EC-PT-RL-125製品グレード
50 µm Transparent PCR-PET Release Liner — 30-50 gf/in release規定グレード
50 µm transparent PCR-PET / release coatingRelease force 30-50 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner30-50 gf/in release film
EC-PT-RL-126製品グレード
50 µm Transparent PCR-PET Release Liner — 40-60 gf/in release規定グレード
50 µm transparent PCR-PET / release coatingRelease force 40-60 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner40-60 gf/in release film
EC-PT-RL-131製品グレード
75 µm Transparent PCR-PET Release Liner — <=5 gf/in release規定グレード
75 µm transparent PCR-PET / release coatingRelease force <=5 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner<=5 gf/in release film
EC-PT-RL-132製品グレード
75 µm Transparent PCR-PET Release Liner — 5-15 gf/in release規定グレード
75 µm transparent PCR-PET / release coatingRelease force 5-15 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner5-15 gf/in release film
EC-PT-RL-133製品グレード
75 µm Transparent PCR-PET Release Liner — 18-30 gf/in release規定グレード
75 µm transparent PCR-PET / release coatingRelease force 18-30 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner18-30 gf/in release film
EC-PT-RL-134製品グレード
75 µm Transparent PCR-PET Release Liner — 30-50 gf/in release規定グレード
75 µm transparent PCR-PET / release coatingRelease force 30-50 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner30-50 gf/in release film
EC-PT-RL-135製品グレード
75 µm Transparent PCR-PET Release Liner — 40-60 gf/in release規定グレード
75 µm transparent PCR-PET / release coatingRelease force 40-60 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner40-60 gf/in release film
EC-PT-RL-141製品グレード
100 µm Transparent PCR-PET Release Liner — <=5 gf/in release参考・データ確認
100 µm transparent PCR-PET / release coatingRelease force <=5 gf/in; grade spelling requires confirmation; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
EC-PT-RL-142製品グレード
100 µm Transparent PCR-PET Release Liner — 5-15 gf/in release規定グレード
100 µm transparent PCR-PET / release coatingRelease force 5-15 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
100 micron PCR PET release liner5-15 gf/in release film
EC-PT-RL-143製品グレード
100 µm Transparent PCR-PET Release Liner — 18-30 gf/in release規定グレード
100 µm transparent PCR-PET / release coatingRelease force 18-30 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
100 micron PCR PET release liner18-30 gf/in release film
EC-PT-RL-144製品グレード
100 µm Transparent PCR-PET Release Liner — 30-50 gf/in release規定グレード
100 µm transparent PCR-PET / release coatingRelease force 30-50 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
100 micron PCR PET release liner30-50 gf/in release film
EC-PT-RL-145製品グレード
100 µm Transparent PCR-PET Release Liner — 40-60 gf/in release規定グレード
100 µm transparent PCR-PET / release coatingRelease force 40-60 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
100 micron PCR PET release liner40-60 gf/in release film
EC-PT-RL-201製品グレード
50 µm Blue PCR-PET Release Liner — <=5 gf/in release規定グレード
50 µm blue PCR-PET / release coatingRelease force <=5 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner<=5 gf/in release film
EC-PT-RL-202製品グレード
50 µm Blue PCR-PET Release Liner — 5-15 gf/in release規定グレード
50 µm blue PCR-PET / release coatingRelease force 5-15 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner5-15 gf/in release film
EC-PT-RL-203製品グレード
50 µm Blue PCR-PET Release Liner — 18-30 gf/in release規定グレード
50 µm blue PCR-PET / release coatingRelease force 18-30 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner18-30 gf/in release film
EC-PT-RL-204製品グレード
50 µm Blue PCR-PET Release Liner — 30-50 gf/in release規定グレード
50 µm blue PCR-PET / release coatingRelease force 30-50 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner30-50 gf/in release film
EC-PT-RL-205製品グレード
50 µm Blue PCR-PET Release Liner — 40-60 gf/in release規定グレード
50 µm blue PCR-PET / release coatingRelease force 40-60 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner40-60 gf/in release film
EC-PT-RL-211製品グレード
75 µm Blue PCR-PET Release Liner — <=5 gf/in release規定グレード
75 µm blue PCR-PET / release coatingRelease force <=5 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner<=5 gf/in release film
EC-PT-RL-212製品グレード
75 µm Blue PCR-PET Release Liner — 5-15 gf/in release規定グレード
75 µm blue PCR-PET / release coatingRelease force 5-15 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner5-15 gf/in release film
EC-PT-RL-213製品グレード
75 µm Blue PCR-PET Release Liner — 18-30 gf/in release規定グレード
75 µm blue PCR-PET / release coatingRelease force 18-30 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner18-30 gf/in release film
EC-PT-RL-214製品グレード
75 µm Blue PCR-PET Release Liner — 30-50 gf/in release規定グレード
75 µm blue PCR-PET / release coatingRelease force 30-50 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner30-50 gf/in release film
EC-PT-RL-215製品グレード
75 µm Blue PCR-PET Release Liner — 40-60 gf/in release規定グレード
75 µm blue PCR-PET / release coatingRelease force 40-60 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner40-60 gf/in release film
EC-PT-PU-1xx製品シリーズ
Regular PU Protective-Film Platform技術検討
PET carrier / PU adhesivePlatform; 60-85 µm; high transmission, low haze, clean removal
Display-module shipment protection
EC-PT-PU-2xx製品シリーズ
Medium/High-Adhesion PU Protective-Film Platform技術検討
PET carrier / PU adhesivePlatform; 60-85 µm; film surface resistivity 10^8 Ω; tear voltage <500 V
Electronics module protection
EC-PT-PU-3xx製品シリーズ
Anti-Static PU Protective-Film Platform技術検討
PET carrier / anti-static PU adhesivePlatform; 60-85 µm; adhesive resistivity 10^9 Ω; tear voltage <500 V
ESD-sensitive module protection
EC-PT-PU-4xx製品シリーズ
Low Tear-Voltage PU Protective-Film Platform技術検討
PET carrier / low-charge PU adhesivePlatform; 60-85 µm; tear voltage <150 V
ESD-sensitive display protection
EC-PT-TL-101製品グレード
Hardcoated Triple-Layer Screen Film規定グレード
Removable PET / hardcoated PET / silicone adhesive / PET liner120 µm; T≥90%; haze≤1%; peel 2 gf/24 mm; scratch-resistant surface
Screen protection and tempered-glass lamination
triple layer screen protectorhardcoat PET film
EC-PT-TL-102製品グレード
Air-Venting Triple-Layer Screen Film規定グレード
Removable PET / optical PET / air-venting silicone adhesive / PET liner116 µm; T≥88%; haze≤1%; peel 2 gf/24 mm
Screen protection requiring fast air evacuation
air venting screen protection film
EC-PT-AB-101製品グレード
Regular-Glass AB Protective Film規定グレード
PET carrier / acrylic adhesive side A / silicone adhesive side B / liners115 µm; A peel 800±400; B peel 2-8 gf/24 mm
Tempered-glass protective-film lamination
AB protective filmtempered glass lamination film
EC-PT-AB-102製品グレード
2.5D Screen AB Protective Film規定グレード
PET carrier / high-bond acrylic side / silicone air-release side / liners180-195 µm; A peel >1800; B peel 5-8 gf/24 mm
2.5D screen protection
2.5D screen protective filmhigh adhesion AB film
EC-PT-AS-101製品グレード
75 µm Anti-Splinter Film規定グレード
Removable PET protection film / hardcoat / high-transmittance PET / OCA / PET release liner75 µm; T≥90%; haze≤1%; peel≥1600 gf/24 mm
Cover-glass shatter retention
anti splinter filmglass shatter protection film
EC-PT-AS-102製品グレード
110 µm Anti-Splinter Film規定グレード
Removable PET protection film / hardcoat / high-transmittance PET / OCA / PET release liner110 µm; T≥90%; haze≤1%; peel≥1800 gf/24 mm
Cover-glass shatter retention
110 micron shatterproof film
EC-PT-AS-103製品グレード
150 µm High-Adhesion Anti-Splinter Film規定グレード
Removable PET protection film / hardcoat / high-transmittance PET / OCA / PET release liner150 µm; T≥90%; haze≤1%; peel≥2000 gf/24 mm
High-retention cover-glass reinforcement
150 micron anti splinter film
EC-PT-DF-101製品グレード
125 µm Deco Anti-Splinter Film規定グレード
Removable PE protection film / surface-primed optical PET / OCA / release liner125 µm; primer supports UV transfer, electroplating and brushing; peel≥17 gf/24 mm
Cover-glass decoration and reinforcement
cover glass decoration filmUV transfer primer PET
EC-PT-DF-102製品グレード
188 µm Deco Anti-Splinter Film規定グレード
Removable PE protection film / surface-primed optical PET / OCA / release liner188 µm; primer supports decoration processes; peel≥18 gf/24 mm
Cover-glass decoration and reinforcement
188 micron cover glass deco film
Protection, release control and retained cover-glass functions.
01Temporary protection films shield polarizers and display surfaces during converting, shipment and assembly, then peel away at the specified step. Screen-protector laminates, anti-splinter films and decorative films retain their functional layers in the finished assembly; only their designated protection and release liners are removed.
02Release liners provide a controlled separation interface for pressure-sensitive adhesive processing. Silicone, fluorinated and silicone-free surfaces are not interchangeable: the adhesive chemistry, coating side, reference tape, dwell, peel angle and speed must be defined together.
03Optical cleanliness is a system property. Base-film quality, coating uniformity, antistatic behavior, roll direction, winding and packaging can all affect particles, impressions and downstream lamination yield.
用途を基準に評価する性能.
利点は、対象基材、工程、最終アセンブリで評価します。
01
Separates optical protection, shatter retention and release-liner functions
02
Named thickness, color and release-force choices for PCR-PET liners
03
Antistatic and low-tear-voltage options for sensitive display modules
04
Cover-glass reinforcement and decorative-film constructions in the same selection system
材料定義から量産積層構造の認定まで.
認定では、材料、加工経路、顧客の生産ラインを一体として確認します。
01Define the protected surface
Record glass, polarizer, optical film or module finish, roughness and cleanliness limits.
02Match adhesion and release
Select PSA and release chemistry for the dwell, heat and removal sequence.
03Convert and package
Control coating side, roll direction, particles, winding tension and cut edges.
04Verify the final state
For temporary films, inspect after removal. For retained films, qualify adhesion, optical appearance and the required protective or decorative function after aging.
仕様承認前に収集すべき検証データ.
実使用を代表する基材、工程条件、エージング順序を使用してください。
- Initial and aged peel on the exact optical surface
- Release force with specified reference tape, dwell, angle and speed
- Residue, stain, fogging, particle and surface-imprint inspection
- Static generation and decay where display electronics require ESD control
- Dimensional stability and edge behavior through converting and shipment
数値には試験方法と承認済み改訂版が必要です.
代表値は選定の参考であり、管理規格は承認済み TDS に従います。
特性代表値 / 範囲管理
OpticsTransmission and haze by gradeMeasure on the complete laminate
Release / peelGrade- and side-specificState substrate, dwell, speed and angle
Static controlSurface and adhesive-side values by gradeVerify after converting
Thickness / colorGrade-specific base or laminate thickness and colorState whether protection and release liners are included
代表値は保証規格ではありません。最終基準は承認済みECLEAR TDSとお客様の検証結果に従います。
ライン試験前に技術者が確認する質問.
サンプル依頼前に、材料の役割、界面、工程範囲を明確にしてください。
Can one protection film cover every display surface?+
No. Bare glass, coated glass, polarizer, matte film and optical-sheet surfaces have different surface energy and damage sensitivity. Each interface and removal step needs qualification.
Why are release values not compared as a single number?+
Release force changes with the reference adhesive, dwell, temperature, peel angle, speed and liner orientation. A useful comparison must use the same complete method.
Can ECLEAR recommend a grade from an application description alone?+
A first shortlist is possible, but a production recommendation requires the substrate, layer construction, equipment, process sequence, test method and acceptance criteria. ECLEAR normally moves from requirement definition to laboratory matching, samples, line trial and a frozen approved specification.
Are the values shown on this page guaranteed specifications?+
No. Website values and constructions are selection guidance. Guaranteed limits, test conditions, packaging and shelf life are controlled only by the latest ECLEAR-approved TDS, quality agreement and customer qualification record.
このプラットフォームを評価する用途.
各用途で、積層構造全体の適合性とライン検証が必要です。
プロセスウィンドウ
管理すべき工程パラメータ.
一つの公称条件だけでなく、工程範囲全体を記録してください。
- Identify the protected surface, optical stack and exact removal point.
- Match release force to the adhesive chemistry, dwell and storage history.
- Control particles, static charge, web direction and liner-removal speed.
- Validate optics and cosmetic quality after die cutting, lamination and aging.
選定時の確認事項
選定に必要な情報.
これらの情報により、ECLEAR はグレードと検証計画を絞り込めます。
- Q1Is the film a temporary protector, permanent anti-splinter layer or release liner?
- Q2What are the substrate, optical and surface-energy requirements?
- Q3Which side releases first and under what line conditions?
- Q4Are antistatic, PCR-content, air-venting or decorative-primer functions required?
計画的な試験で早期に確認すべきリスク.
早期の不具合確認により、量産拡大のリスクと誤った材料比較を低減します。
!
Using release-force data without its reference tape and test method
!
Cropping, scratching or contaminating optical surfaces during conversion
!
Static discharge or high tear voltage at liner removal
!
Treating a family placeholder as a frozen production specification
管理された技術文書.
選定した ECLEAR グレードと用途に対応する最新版を請求してください。
代表構成と用途概念は、材料選定のための情報です。供給状況、構成、性能、工程条件はグレードごとに異なり、最新の ECLEAR 承認 TDS、用途試験、および顧客の最終認定に従います。
関連材料システム.
同じ積層構造または工程で本製品と相互作用する周辺材料を確認してください。
技術相談
プロジェクトを開始 ↗単一材料ではなく、積層構造全体を検証してください.
適切な提案のため、基材、構成、工程、合格基準をご提示ください。