®Films fonctionnels
Protection des écrans et films fonctionnels conservés dans le produit
Protection temporaire des polariseurs et des écrans, films de protection d’écran, de rétention des éclats et de décoration conservés dans le produit, ainsi que protecteurs antiadhérents en PCR-PET. Sélectionnez la construction selon sa fonction optique, l’interface de collage et l’étape de retrait prévue.
Ce que contient l’empilement du matériau.
Les couches sont présentées dans l’ordre fonctionnel ; la construction exacte dépend du grade.
- 01Optical or recycled-content PET carrier selected by thickness and color
- 02Silicone, PU, acrylic, OCA or release coating matched to the interface
- 03Optional hardcoat, antistatic treatment, air-venting texture or decorative primer
- 04Release liner and removable protection layers defined by the converting sequence
Grades identifiés pour la sélection technique.
Chaque modèle ECLEAR correspond à un rôle et à une construction distincts. Les correspondances de fabrication restent maîtrisées dans le référentiel produit ECLEAR pour assurer la traçabilité.
50 / 50 références
Modèle ECLEARProduit / rôleConstruction / plage typeApplications
EC-PL-101Grade du produit
Antistatic Polarizer Shipping Protection FilmRéférence · données à confirmer
38 μm PET / 15 μm PSA / 25 μm release liner53 μm reported functional-film thickness (excluding the separate release liner); transmittance 90.12%; haze 2.19%; peel table 2.56 g/25 mm; adhesive and outer surfaces 10^8–10^10 Ω. Data confirmation required: separate peel curves show 7.4 and 3.8 g/25 mm averages on two polarizers
Temporary shipment protection for polarizers and qualified AG or AR surfaces
EC-PT-RL-101Grade du produit
25 µm Transparent PCR-PET Release Liner — <=5 gf/in release · R2 construction confirmationGrade spécifié
25 µm transparent PCR-PET / release coatingRelease force <=5 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
25 micron PCR PET release liner<=5 gf/in release film
EC-PT-RL-102Grade du produit
25 µm Transparent PCR-PET Release Liner — 5-15 gf/in release · R2 construction confirmationGrade spécifié
25 µm transparent PCR-PET / release coatingRelease force 5-15 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
25 micron PCR PET release liner5-15 gf/in release film
EC-PT-RL-103Grade du produit
25 µm Transparent PCR-PET Release Liner — 18-30 gf/in release · R2 construction confirmationGrade spécifié
25 µm transparent PCR-PET / release coatingRelease force 18-30 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
25 micron PCR PET release liner18-30 gf/in release film
EC-PT-RL-104Grade du produit
25 µm Transparent PCR-PET Release Liner — 30-50 gf/in release · R2 construction confirmationGrade spécifié
25 µm transparent PCR-PET / release coatingRelease force 30-50 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
25 micron PCR PET release liner30-50 gf/in release film
EC-PT-RL-105Grade du produit
25 µm Transparent PCR-PET Release Liner — 40-60 gf/in release · R2 construction confirmationGrade spécifié
25 µm transparent PCR-PET / release coatingRelease force 40-60 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
25 micron PCR PET release liner40-60 gf/in release film
EC-PT-RL-111Grade du produit
38 µm Transparent PCR-PET Release Liner — <=5 gf/in releaseGrade spécifié
38 µm transparent PCR-PET / release coatingRelease force <=5 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
38 micron PCR PET release liner<=5 gf/in release film
EC-PT-RL-112Grade du produit
38 µm Transparent PCR-PET Release Liner — 5-15 gf/in releaseGrade spécifié
38 µm transparent PCR-PET / release coatingRelease force 5-15 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
38 micron PCR PET release liner5-15 gf/in release film
EC-PT-RL-113Grade du produit
38 µm Transparent PCR-PET Release Liner — 18-30 gf/in releaseGrade spécifié
38 µm transparent PCR-PET / release coatingRelease force 18-30 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
38 micron PCR PET release liner18-30 gf/in release film
EC-PT-RL-114Grade du produit
38 µm Transparent PCR-PET Release Liner — 30-50 gf/in releaseGrade spécifié
38 µm transparent PCR-PET / release coatingRelease force 30-50 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
38 micron PCR PET release liner30-50 gf/in release film
EC-PT-RL-115Grade du produit
38 µm Transparent PCR-PET Release Liner — 40-60 gf/in releaseGrade spécifié
38 µm transparent PCR-PET / release coatingRelease force 40-60 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
38 micron PCR PET release liner40-60 gf/in release film
EC-PT-RL-121Grade du produit
50 µm Transparent PCR-PET Release Liner — <=5 gf/in releaseGrade spécifié
50 µm transparent PCR-PET / release coatingRelease force <=5 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner<=5 gf/in release film
EC-PT-RL-122Grade du produit
50 µm Transparent PCR-PET Release Liner — <=5 gf/in release · R2 construction confirmationRéférence · données à confirmer
50 µm transparent PCR-PET / release coatingRelease force <=5 gf/in; R2 construction not disclosed; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
EC-PT-RL-123Grade du produit
50 µm Transparent PCR-PET Release Liner — 5-15 gf/in releaseGrade spécifié
50 µm transparent PCR-PET / release coatingRelease force 5-15 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner5-15 gf/in release film
EC-PT-RL-124Grade du produit
50 µm Transparent PCR-PET Release Liner — 18-30 gf/in releaseGrade spécifié
50 µm transparent PCR-PET / release coatingRelease force 18-30 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner18-30 gf/in release film
EC-PT-RL-125Grade du produit
50 µm Transparent PCR-PET Release Liner — 30-50 gf/in releaseGrade spécifié
50 µm transparent PCR-PET / release coatingRelease force 30-50 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner30-50 gf/in release film
EC-PT-RL-126Grade du produit
50 µm Transparent PCR-PET Release Liner — 40-60 gf/in releaseGrade spécifié
50 µm transparent PCR-PET / release coatingRelease force 40-60 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner40-60 gf/in release film
EC-PT-RL-131Grade du produit
75 µm Transparent PCR-PET Release Liner — <=5 gf/in releaseGrade spécifié
75 µm transparent PCR-PET / release coatingRelease force <=5 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner<=5 gf/in release film
EC-PT-RL-132Grade du produit
75 µm Transparent PCR-PET Release Liner — 5-15 gf/in releaseGrade spécifié
75 µm transparent PCR-PET / release coatingRelease force 5-15 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner5-15 gf/in release film
EC-PT-RL-133Grade du produit
75 µm Transparent PCR-PET Release Liner — 18-30 gf/in releaseGrade spécifié
75 µm transparent PCR-PET / release coatingRelease force 18-30 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner18-30 gf/in release film
EC-PT-RL-134Grade du produit
75 µm Transparent PCR-PET Release Liner — 30-50 gf/in releaseGrade spécifié
75 µm transparent PCR-PET / release coatingRelease force 30-50 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner30-50 gf/in release film
EC-PT-RL-135Grade du produit
75 µm Transparent PCR-PET Release Liner — 40-60 gf/in releaseGrade spécifié
75 µm transparent PCR-PET / release coatingRelease force 40-60 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner40-60 gf/in release film
EC-PT-RL-141Grade du produit
100 µm Transparent PCR-PET Release Liner — <=5 gf/in releaseRéférence · données à confirmer
100 µm transparent PCR-PET / release coatingRelease force <=5 gf/in; grade spelling requires confirmation; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
EC-PT-RL-142Grade du produit
100 µm Transparent PCR-PET Release Liner — 5-15 gf/in releaseGrade spécifié
100 µm transparent PCR-PET / release coatingRelease force 5-15 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
100 micron PCR PET release liner5-15 gf/in release film
EC-PT-RL-143Grade du produit
100 µm Transparent PCR-PET Release Liner — 18-30 gf/in releaseGrade spécifié
100 µm transparent PCR-PET / release coatingRelease force 18-30 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
100 micron PCR PET release liner18-30 gf/in release film
EC-PT-RL-144Grade du produit
100 µm Transparent PCR-PET Release Liner — 30-50 gf/in releaseGrade spécifié
100 µm transparent PCR-PET / release coatingRelease force 30-50 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
100 micron PCR PET release liner30-50 gf/in release film
EC-PT-RL-145Grade du produit
100 µm Transparent PCR-PET Release Liner — 40-60 gf/in releaseGrade spécifié
100 µm transparent PCR-PET / release coatingRelease force 40-60 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
100 micron PCR PET release liner40-60 gf/in release film
EC-PT-RL-201Grade du produit
50 µm Blue PCR-PET Release Liner — <=5 gf/in releaseGrade spécifié
50 µm blue PCR-PET / release coatingRelease force <=5 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner<=5 gf/in release film
EC-PT-RL-202Grade du produit
50 µm Blue PCR-PET Release Liner — 5-15 gf/in releaseGrade spécifié
50 µm blue PCR-PET / release coatingRelease force 5-15 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner5-15 gf/in release film
EC-PT-RL-203Grade du produit
50 µm Blue PCR-PET Release Liner — 18-30 gf/in releaseGrade spécifié
50 µm blue PCR-PET / release coatingRelease force 18-30 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner18-30 gf/in release film
EC-PT-RL-204Grade du produit
50 µm Blue PCR-PET Release Liner — 30-50 gf/in releaseGrade spécifié
50 µm blue PCR-PET / release coatingRelease force 30-50 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner30-50 gf/in release film
EC-PT-RL-205Grade du produit
50 µm Blue PCR-PET Release Liner — 40-60 gf/in releaseGrade spécifié
50 µm blue PCR-PET / release coatingRelease force 40-60 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner40-60 gf/in release film
EC-PT-RL-211Grade du produit
75 µm Blue PCR-PET Release Liner — <=5 gf/in releaseGrade spécifié
75 µm blue PCR-PET / release coatingRelease force <=5 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner<=5 gf/in release film
EC-PT-RL-212Grade du produit
75 µm Blue PCR-PET Release Liner — 5-15 gf/in releaseGrade spécifié
75 µm blue PCR-PET / release coatingRelease force 5-15 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner5-15 gf/in release film
EC-PT-RL-213Grade du produit
75 µm Blue PCR-PET Release Liner — 18-30 gf/in releaseGrade spécifié
75 µm blue PCR-PET / release coatingRelease force 18-30 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner18-30 gf/in release film
EC-PT-RL-214Grade du produit
75 µm Blue PCR-PET Release Liner — 30-50 gf/in releaseGrade spécifié
75 µm blue PCR-PET / release coatingRelease force 30-50 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner30-50 gf/in release film
EC-PT-RL-215Grade du produit
75 µm Blue PCR-PET Release Liner — 40-60 gf/in releaseGrade spécifié
75 µm blue PCR-PET / release coatingRelease force 40-60 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner40-60 gf/in release film
EC-PT-PU-1xxSérie de produits
Regular PU Protective-Film PlatformRevue technique
PET carrier / PU adhesivePlatform; 60-85 µm; high transmission, low haze, clean removal
Display-module shipment protection
EC-PT-PU-2xxSérie de produits
Medium/High-Adhesion PU Protective-Film PlatformRevue technique
PET carrier / PU adhesivePlatform; 60-85 µm; film surface resistivity 10^8 Ω; tear voltage <500 V
Electronics module protection
EC-PT-PU-3xxSérie de produits
Anti-Static PU Protective-Film PlatformRevue technique
PET carrier / anti-static PU adhesivePlatform; 60-85 µm; adhesive resistivity 10^9 Ω; tear voltage <500 V
ESD-sensitive module protection
EC-PT-PU-4xxSérie de produits
Low Tear-Voltage PU Protective-Film PlatformRevue technique
PET carrier / low-charge PU adhesivePlatform; 60-85 µm; tear voltage <150 V
ESD-sensitive display protection
EC-PT-TL-101Grade du produit
Hardcoated Triple-Layer Screen FilmGrade spécifié
Removable PET / hardcoated PET / silicone adhesive / PET liner120 µm; T≥90%; haze≤1%; peel 2 gf/24 mm; scratch-resistant surface
Screen protection and tempered-glass lamination
triple layer screen protectorhardcoat PET film
EC-PT-TL-102Grade du produit
Air-Venting Triple-Layer Screen FilmGrade spécifié
Removable PET / optical PET / air-venting silicone adhesive / PET liner116 µm; T≥88%; haze≤1%; peel 2 gf/24 mm
Screen protection requiring fast air evacuation
air venting screen protection film
EC-PT-AB-101Grade du produit
Regular-Glass AB Protective FilmGrade spécifié
PET carrier / acrylic adhesive side A / silicone adhesive side B / liners115 µm; A peel 800±400; B peel 2-8 gf/24 mm
Tempered-glass protective-film lamination
AB protective filmtempered glass lamination film
EC-PT-AB-102Grade du produit
2.5D Screen AB Protective FilmGrade spécifié
PET carrier / high-bond acrylic side / silicone air-release side / liners180-195 µm; A peel >1800; B peel 5-8 gf/24 mm
2.5D screen protection
2.5D screen protective filmhigh adhesion AB film
EC-PT-AS-101Grade du produit
75 µm Anti-Splinter FilmGrade spécifié
Removable PET protection film / hardcoat / high-transmittance PET / OCA / PET release liner75 µm; T≥90%; haze≤1%; peel≥1600 gf/24 mm
Cover-glass shatter retention
anti splinter filmglass shatter protection film
EC-PT-AS-102Grade du produit
110 µm Anti-Splinter FilmGrade spécifié
Removable PET protection film / hardcoat / high-transmittance PET / OCA / PET release liner110 µm; T≥90%; haze≤1%; peel≥1800 gf/24 mm
Cover-glass shatter retention
110 micron shatterproof film
EC-PT-AS-103Grade du produit
150 µm High-Adhesion Anti-Splinter FilmGrade spécifié
Removable PET protection film / hardcoat / high-transmittance PET / OCA / PET release liner150 µm; T≥90%; haze≤1%; peel≥2000 gf/24 mm
High-retention cover-glass reinforcement
150 micron anti splinter film
EC-PT-DF-101Grade du produit
125 µm Deco Anti-Splinter FilmGrade spécifié
Removable PE protection film / surface-primed optical PET / OCA / release liner125 µm; primer supports UV transfer, electroplating and brushing; peel≥17 gf/24 mm
Cover-glass decoration and reinforcement
cover glass decoration filmUV transfer primer PET
EC-PT-DF-102Grade du produit
188 µm Deco Anti-Splinter FilmGrade spécifié
Removable PE protection film / surface-primed optical PET / OCA / release liner188 µm; primer supports decoration processes; peel≥18 gf/24 mm
Cover-glass decoration and reinforcement
188 micron cover glass deco film
Protection, release control and retained cover-glass functions.
01Temporary protection films shield polarizers and display surfaces during converting, shipment and assembly, then peel away at the specified step. Screen-protector laminates, anti-splinter films and decorative films retain their functional layers in the finished assembly; only their designated protection and release liners are removed.
02Release liners provide a controlled separation interface for pressure-sensitive adhesive processing. Silicone, fluorinated and silicone-free surfaces are not interchangeable: the adhesive chemistry, coating side, reference tape, dwell, peel angle and speed must be defined together.
03Optical cleanliness is a system property. Base-film quality, coating uniformity, antistatic behavior, roll direction, winding and packaging can all affect particles, impressions and downstream lamination yield.
Des performances définies autour de l’application.
Les avantages sont évalués sur le substrat, le procédé et l’assemblage final visés.
01
Separates optical protection, shatter retention and release-liner functions
02
Named thickness, color and release-force choices for PCR-PET liners
03
Antistatic and low-tear-voltage options for sensitive display modules
04
Cover-glass reinforcement and decorative-film constructions in the same selection system
De la définition du matériau à un empilement de production qualifié.
La qualification relie le matériau, la transformation et la ligne de production du client.
01Define the protected surface
Record glass, polarizer, optical film or module finish, roughness and cleanliness limits.
02Match adhesion and release
Select PSA and release chemistry for the dwell, heat and removal sequence.
03Convert and package
Control coating side, roll direction, particles, winding tension and cut edges.
04Verify the final state
For temporary films, inspect after removal. For retained films, qualify adhesion, optical appearance and the required protective or decorative function after aging.
Les preuves à réunir avant de libérer la spécification.
Utilisez des substrats, des conditions de procédé et des séquences de vieillissement représentatifs.
- Initial and aged peel on the exact optical surface
- Release force with specified reference tape, dwell, angle and speed
- Residue, stain, fogging, particle and surface-imprint inspection
- Static generation and decay where display electronics require ESD control
- Dimensional stability and edge behavior through converting and shipment
Toute valeur exige une méthode et une révision approuvée.
Les valeurs types orientent la sélection ; les limites maîtrisées proviennent de la TDS approuvée.
PropriétéValeur type / plageContrôle
OpticsTransmission and haze by gradeMeasure on the complete laminate
Release / peelGrade- and side-specificState substrate, dwell, speed and angle
Static controlSurface and adhesive-side values by gradeVerify after converting
Thickness / colorGrade-specific base or laminate thickness and colorState whether protection and release liners are included
Les valeurs types ne constituent pas des spécifications. Les limites finales dépendent de la TDS ECLEAR approuvée et de la validation client.
Les questions des ingénieurs avant un essai en ligne.
Clarifiez le rôle du matériau, les interfaces et la fenêtre de procédé avant l’échantillonnage.
Can one protection film cover every display surface?+
No. Bare glass, coated glass, polarizer, matte film and optical-sheet surfaces have different surface energy and damage sensitivity. Each interface and removal step needs qualification.
Why are release values not compared as a single number?+
Release force changes with the reference adhesive, dwell, temperature, peel angle, speed and liner orientation. A useful comparison must use the same complete method.
Can ECLEAR recommend a grade from an application description alone?+
A first shortlist is possible, but a production recommendation requires the substrate, layer construction, equipment, process sequence, test method and acceptance criteria. ECLEAR normally moves from requirement definition to laboratory matching, samples, line trial and a frozen approved specification.
Are the values shown on this page guaranteed specifications?+
No. Website values and constructions are selection guidance. Guaranteed limits, test conditions, packaging and shelf life are controlled only by the latest ECLEAR-approved TDS, quality agreement and customer qualification record.
Domaines dans lesquels cette plateforme est évaluée.
Chaque application exige encore la compatibilité de l’empilement complet et la validation en ligne.
FENÊTRE DE PROCÉDÉ
Paramètres à maîtriser.
Consignez la fenêtre de procédé complète, et non un seul réglage nominal.
- Identify the protected surface, optical stack and exact removal point.
- Match release force to the adhesive chemistry, dwell and storage history.
- Control particles, static charge, web direction and liner-removal speed.
- Validate optics and cosmetic quality after die cutting, lamination and aging.
QUESTIONS DE SÉLECTION
Les informations dont nous avons besoin.
Ces données permettent à ECLEAR de cibler le grade et le plan de validation.
- Q1Is the film a temporary protector, permanent anti-splinter layer or release liner?
- Q2What are the substrate, optical and surface-energy requirements?
- Q3Which side releases first and under what line conditions?
- Q4Are antistatic, PCR-content, air-venting or decorative-primer functions required?
Ce qu’un essai rigoureux doit révéler rapidement.
Les contrôles précoces réduisent les risques de mise à l’échelle et les comparaisons erronées.
!
Using release-force data without its reference tape and test method
!
Cropping, scratching or contaminating optical surfaces during conversion
!
Static discharge or high tear voltage at liner removal
!
Treating a family placeholder as a frozen production specification
Documents techniques maîtrisés.
Demandez la révision en vigueur pour le grade ECLEAR et l’application sélectionnés.
PDFBulletin produitDisponible après examen du contrôle documentaireDemander →PDFTDS simplifiéeDisponible après examen du contrôle documentaireDemander →PDFSDS et dossier de conformitéDisponible après examen du contrôle documentaireDemander →
Les constructions types et les concepts d’application sont fournis uniquement pour la sélection du matériau. La disponibilité, la structure, les performances et les conditions de procédé dépendent du grade et restent soumises à la dernière TDS approuvée par ECLEAR, aux essais d’application et à la qualification finale du client.
Systèmes de matériaux associés.
Examinez les matériaux adjacents qui interagissent avec ce produit dans le même empilement ou procédé.
CONSULTATION TECHNIQUE
Démarrer un projet ↗Validez l’empilement complet, pas un matériau isolé.
Communiquez le substrat, la construction, le procédé et les critères d’acceptation pour une recommandation ciblée.