®Функциональные пленки
Защита дисплеев и функциональные плёнки, остающиеся в изделии
Временная защита поляризаторов и дисплеев, остающиеся в изделии защитные плёнки для экранов, противоосколочные и декоративные плёнки, а также антиадгезионные лайнеры из PCR-PET. Выбирайте конструкцию по оптической функции, границе клеевого соединения и предусмотренному этапу удаления.
Из чего состоит структура материала.
Слои указаны в функциональном порядке; точная конструкция зависит от марки.
- 01Optical or recycled-content PET carrier selected by thickness and color
- 02Silicone, PU, acrylic, OCA or release coating matched to the interface
- 03Optional hardcoat, antistatic treatment, air-venting texture or decorative primer
- 04Release liner and removable protection layers defined by the converting sequence
Именованные марки для технического подбора.
Каждая модель ECLEAR обозначает отдельную функцию и конструкцию материала. Производственные соответствия контролируются в основном справочнике ECLEAR для прослеживаемости.
50 / 50 записей
Модель ECLEARПродукт / функцияКонструкция / типичный диапазонПрименение
EC-PL-101Марка продукта
Antistatic Polarizer Shipping Protection FilmСправочно · подтвердить
38 μm PET / 15 μm PSA / 25 μm release liner53 μm reported functional-film thickness (excluding the separate release liner); transmittance 90.12%; haze 2.19%; peel table 2.56 g/25 mm; adhesive and outer surfaces 10^8–10^10 Ω. Data confirmation required: separate peel curves show 7.4 and 3.8 g/25 mm averages on two polarizers
Temporary shipment protection for polarizers and qualified AG or AR surfaces
EC-PT-RL-101Марка продукта
25 µm Transparent PCR-PET Release Liner — <=5 gf/in release · R2 construction confirmationЗаданная марка
25 µm transparent PCR-PET / release coatingRelease force <=5 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
25 micron PCR PET release liner<=5 gf/in release film
EC-PT-RL-102Марка продукта
25 µm Transparent PCR-PET Release Liner — 5-15 gf/in release · R2 construction confirmationЗаданная марка
25 µm transparent PCR-PET / release coatingRelease force 5-15 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
25 micron PCR PET release liner5-15 gf/in release film
EC-PT-RL-103Марка продукта
25 µm Transparent PCR-PET Release Liner — 18-30 gf/in release · R2 construction confirmationЗаданная марка
25 µm transparent PCR-PET / release coatingRelease force 18-30 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
25 micron PCR PET release liner18-30 gf/in release film
EC-PT-RL-104Марка продукта
25 µm Transparent PCR-PET Release Liner — 30-50 gf/in release · R2 construction confirmationЗаданная марка
25 µm transparent PCR-PET / release coatingRelease force 30-50 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
25 micron PCR PET release liner30-50 gf/in release film
EC-PT-RL-105Марка продукта
25 µm Transparent PCR-PET Release Liner — 40-60 gf/in release · R2 construction confirmationЗаданная марка
25 µm transparent PCR-PET / release coatingRelease force 40-60 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
25 micron PCR PET release liner40-60 gf/in release film
EC-PT-RL-111Марка продукта
38 µm Transparent PCR-PET Release Liner — <=5 gf/in releaseЗаданная марка
38 µm transparent PCR-PET / release coatingRelease force <=5 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
38 micron PCR PET release liner<=5 gf/in release film
EC-PT-RL-112Марка продукта
38 µm Transparent PCR-PET Release Liner — 5-15 gf/in releaseЗаданная марка
38 µm transparent PCR-PET / release coatingRelease force 5-15 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
38 micron PCR PET release liner5-15 gf/in release film
EC-PT-RL-113Марка продукта
38 µm Transparent PCR-PET Release Liner — 18-30 gf/in releaseЗаданная марка
38 µm transparent PCR-PET / release coatingRelease force 18-30 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
38 micron PCR PET release liner18-30 gf/in release film
EC-PT-RL-114Марка продукта
38 µm Transparent PCR-PET Release Liner — 30-50 gf/in releaseЗаданная марка
38 µm transparent PCR-PET / release coatingRelease force 30-50 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
38 micron PCR PET release liner30-50 gf/in release film
EC-PT-RL-115Марка продукта
38 µm Transparent PCR-PET Release Liner — 40-60 gf/in releaseЗаданная марка
38 µm transparent PCR-PET / release coatingRelease force 40-60 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
38 micron PCR PET release liner40-60 gf/in release film
EC-PT-RL-121Марка продукта
50 µm Transparent PCR-PET Release Liner — <=5 gf/in releaseЗаданная марка
50 µm transparent PCR-PET / release coatingRelease force <=5 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner<=5 gf/in release film
EC-PT-RL-122Марка продукта
50 µm Transparent PCR-PET Release Liner — <=5 gf/in release · R2 construction confirmationСправочно · подтвердить
50 µm transparent PCR-PET / release coatingRelease force <=5 gf/in; R2 construction not disclosed; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
EC-PT-RL-123Марка продукта
50 µm Transparent PCR-PET Release Liner — 5-15 gf/in releaseЗаданная марка
50 µm transparent PCR-PET / release coatingRelease force 5-15 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner5-15 gf/in release film
EC-PT-RL-124Марка продукта
50 µm Transparent PCR-PET Release Liner — 18-30 gf/in releaseЗаданная марка
50 µm transparent PCR-PET / release coatingRelease force 18-30 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner18-30 gf/in release film
EC-PT-RL-125Марка продукта
50 µm Transparent PCR-PET Release Liner — 30-50 gf/in releaseЗаданная марка
50 µm transparent PCR-PET / release coatingRelease force 30-50 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner30-50 gf/in release film
EC-PT-RL-126Марка продукта
50 µm Transparent PCR-PET Release Liner — 40-60 gf/in releaseЗаданная марка
50 µm transparent PCR-PET / release coatingRelease force 40-60 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner40-60 gf/in release film
EC-PT-RL-131Марка продукта
75 µm Transparent PCR-PET Release Liner — <=5 gf/in releaseЗаданная марка
75 µm transparent PCR-PET / release coatingRelease force <=5 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner<=5 gf/in release film
EC-PT-RL-132Марка продукта
75 µm Transparent PCR-PET Release Liner — 5-15 gf/in releaseЗаданная марка
75 µm transparent PCR-PET / release coatingRelease force 5-15 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner5-15 gf/in release film
EC-PT-RL-133Марка продукта
75 µm Transparent PCR-PET Release Liner — 18-30 gf/in releaseЗаданная марка
75 µm transparent PCR-PET / release coatingRelease force 18-30 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner18-30 gf/in release film
EC-PT-RL-134Марка продукта
75 µm Transparent PCR-PET Release Liner — 30-50 gf/in releaseЗаданная марка
75 µm transparent PCR-PET / release coatingRelease force 30-50 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner30-50 gf/in release film
EC-PT-RL-135Марка продукта
75 µm Transparent PCR-PET Release Liner — 40-60 gf/in releaseЗаданная марка
75 µm transparent PCR-PET / release coatingRelease force 40-60 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner40-60 gf/in release film
EC-PT-RL-141Марка продукта
100 µm Transparent PCR-PET Release Liner — <=5 gf/in releaseСправочно · подтвердить
100 µm transparent PCR-PET / release coatingRelease force <=5 gf/in; grade spelling requires confirmation; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
EC-PT-RL-142Марка продукта
100 µm Transparent PCR-PET Release Liner — 5-15 gf/in releaseЗаданная марка
100 µm transparent PCR-PET / release coatingRelease force 5-15 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
100 micron PCR PET release liner5-15 gf/in release film
EC-PT-RL-143Марка продукта
100 µm Transparent PCR-PET Release Liner — 18-30 gf/in releaseЗаданная марка
100 µm transparent PCR-PET / release coatingRelease force 18-30 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
100 micron PCR PET release liner18-30 gf/in release film
EC-PT-RL-144Марка продукта
100 µm Transparent PCR-PET Release Liner — 30-50 gf/in releaseЗаданная марка
100 µm transparent PCR-PET / release coatingRelease force 30-50 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
100 micron PCR PET release liner30-50 gf/in release film
EC-PT-RL-145Марка продукта
100 µm Transparent PCR-PET Release Liner — 40-60 gf/in releaseЗаданная марка
100 µm transparent PCR-PET / release coatingRelease force 40-60 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
100 micron PCR PET release liner40-60 gf/in release film
EC-PT-RL-201Марка продукта
50 µm Blue PCR-PET Release Liner — <=5 gf/in releaseЗаданная марка
50 µm blue PCR-PET / release coatingRelease force <=5 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner<=5 gf/in release film
EC-PT-RL-202Марка продукта
50 µm Blue PCR-PET Release Liner — 5-15 gf/in releaseЗаданная марка
50 µm blue PCR-PET / release coatingRelease force 5-15 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner5-15 gf/in release film
EC-PT-RL-203Марка продукта
50 µm Blue PCR-PET Release Liner — 18-30 gf/in releaseЗаданная марка
50 µm blue PCR-PET / release coatingRelease force 18-30 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner18-30 gf/in release film
EC-PT-RL-204Марка продукта
50 µm Blue PCR-PET Release Liner — 30-50 gf/in releaseЗаданная марка
50 µm blue PCR-PET / release coatingRelease force 30-50 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner30-50 gf/in release film
EC-PT-RL-205Марка продукта
50 µm Blue PCR-PET Release Liner — 40-60 gf/in releaseЗаданная марка
50 µm blue PCR-PET / release coatingRelease force 40-60 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
50 micron PCR PET release liner40-60 gf/in release film
EC-PT-RL-211Марка продукта
75 µm Blue PCR-PET Release Liner — <=5 gf/in releaseЗаданная марка
75 µm blue PCR-PET / release coatingRelease force <=5 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner<=5 gf/in release film
EC-PT-RL-212Марка продукта
75 µm Blue PCR-PET Release Liner — 5-15 gf/in releaseЗаданная марка
75 µm blue PCR-PET / release coatingRelease force 5-15 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner5-15 gf/in release film
EC-PT-RL-213Марка продукта
75 µm Blue PCR-PET Release Liner — 18-30 gf/in releaseЗаданная марка
75 µm blue PCR-PET / release coatingRelease force 18-30 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner18-30 gf/in release film
EC-PT-RL-214Марка продукта
75 µm Blue PCR-PET Release Liner — 30-50 gf/in releaseЗаданная марка
75 µm blue PCR-PET / release coatingRelease force 30-50 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner30-50 gf/in release film
EC-PT-RL-215Марка продукта
75 µm Blue PCR-PET Release Liner — 40-60 gf/in releaseЗаданная марка
75 µm blue PCR-PET / release coatingRelease force 40-60 gf/in; typical source value, approved ECLEAR TDS governs
Adhesive converting, liner exchange and sustainable release applications
75 micron PCR PET release liner40-60 gf/in release film
EC-PT-PU-1xxСерия продуктов
Regular PU Protective-Film PlatformТехническая оценка
PET carrier / PU adhesivePlatform; 60-85 µm; high transmission, low haze, clean removal
Display-module shipment protection
EC-PT-PU-2xxСерия продуктов
Medium/High-Adhesion PU Protective-Film PlatformТехническая оценка
PET carrier / PU adhesivePlatform; 60-85 µm; film surface resistivity 10^8 Ω; tear voltage <500 V
Electronics module protection
EC-PT-PU-3xxСерия продуктов
Anti-Static PU Protective-Film PlatformТехническая оценка
PET carrier / anti-static PU adhesivePlatform; 60-85 µm; adhesive resistivity 10^9 Ω; tear voltage <500 V
ESD-sensitive module protection
EC-PT-PU-4xxСерия продуктов
Low Tear-Voltage PU Protective-Film PlatformТехническая оценка
PET carrier / low-charge PU adhesivePlatform; 60-85 µm; tear voltage <150 V
ESD-sensitive display protection
EC-PT-TL-101Марка продукта
Hardcoated Triple-Layer Screen FilmЗаданная марка
Removable PET / hardcoated PET / silicone adhesive / PET liner120 µm; T≥90%; haze≤1%; peel 2 gf/24 mm; scratch-resistant surface
Screen protection and tempered-glass lamination
triple layer screen protectorhardcoat PET film
EC-PT-TL-102Марка продукта
Air-Venting Triple-Layer Screen FilmЗаданная марка
Removable PET / optical PET / air-venting silicone adhesive / PET liner116 µm; T≥88%; haze≤1%; peel 2 gf/24 mm
Screen protection requiring fast air evacuation
air venting screen protection film
EC-PT-AB-101Марка продукта
Regular-Glass AB Protective FilmЗаданная марка
PET carrier / acrylic adhesive side A / silicone adhesive side B / liners115 µm; A peel 800±400; B peel 2-8 gf/24 mm
Tempered-glass protective-film lamination
AB protective filmtempered glass lamination film
EC-PT-AB-102Марка продукта
2.5D Screen AB Protective FilmЗаданная марка
PET carrier / high-bond acrylic side / silicone air-release side / liners180-195 µm; A peel >1800; B peel 5-8 gf/24 mm
2.5D screen protection
2.5D screen protective filmhigh adhesion AB film
EC-PT-AS-101Марка продукта
75 µm Anti-Splinter FilmЗаданная марка
Removable PET protection film / hardcoat / high-transmittance PET / OCA / PET release liner75 µm; T≥90%; haze≤1%; peel≥1600 gf/24 mm
Cover-glass shatter retention
anti splinter filmglass shatter protection film
EC-PT-AS-102Марка продукта
110 µm Anti-Splinter FilmЗаданная марка
Removable PET protection film / hardcoat / high-transmittance PET / OCA / PET release liner110 µm; T≥90%; haze≤1%; peel≥1800 gf/24 mm
Cover-glass shatter retention
110 micron shatterproof film
EC-PT-AS-103Марка продукта
150 µm High-Adhesion Anti-Splinter FilmЗаданная марка
Removable PET protection film / hardcoat / high-transmittance PET / OCA / PET release liner150 µm; T≥90%; haze≤1%; peel≥2000 gf/24 mm
High-retention cover-glass reinforcement
150 micron anti splinter film
EC-PT-DF-101Марка продукта
125 µm Deco Anti-Splinter FilmЗаданная марка
Removable PE protection film / surface-primed optical PET / OCA / release liner125 µm; primer supports UV transfer, electroplating and brushing; peel≥17 gf/24 mm
Cover-glass decoration and reinforcement
cover glass decoration filmUV transfer primer PET
EC-PT-DF-102Марка продукта
188 µm Deco Anti-Splinter FilmЗаданная марка
Removable PE protection film / surface-primed optical PET / OCA / release liner188 µm; primer supports decoration processes; peel≥18 gf/24 mm
Cover-glass decoration and reinforcement
188 micron cover glass deco film
Protection, release control and retained cover-glass functions.
01Temporary protection films shield polarizers and display surfaces during converting, shipment and assembly, then peel away at the specified step. Screen-protector laminates, anti-splinter films and decorative films retain their functional layers in the finished assembly; only their designated protection and release liners are removed.
02Release liners provide a controlled separation interface for pressure-sensitive adhesive processing. Silicone, fluorinated and silicone-free surfaces are not interchangeable: the adhesive chemistry, coating side, reference tape, dwell, peel angle and speed must be defined together.
03Optical cleanliness is a system property. Base-film quality, coating uniformity, antistatic behavior, roll direction, winding and packaging can all affect particles, impressions and downstream lamination yield.
Характеристики в контексте применения.
Преимущества оцениваются на целевой подложке, в реальном процессе и готовой сборке.
01
Separates optical protection, shatter retention and release-liner functions
02
Named thickness, color and release-force choices for PCR-PET liners
03
Antistatic and low-tear-voltage options for sensitive display modules
04
Cover-glass reinforcement and decorative-film constructions in the same selection system
От определения материала до квалифицированной производственной структуры.
Квалификация связывает материал, переработку и производственную линию заказчика.
01Define the protected surface
Record glass, polarizer, optical film or module finish, roughness and cleanliness limits.
02Match adhesion and release
Select PSA and release chemistry for the dwell, heat and removal sequence.
03Convert and package
Control coating side, roll direction, particles, winding tension and cut edges.
04Verify the final state
For temporary films, inspect after removal. For retained films, qualify adhesion, optical appearance and the required protective or decorative function after aging.
Доказательства, необходимые до выпуска спецификации.
Используйте репрезентативные подложки, режимы процесса и циклы старения.
- Initial and aged peel on the exact optical surface
- Release force with specified reference tape, dwell, angle and speed
- Residue, stain, fogging, particle and surface-imprint inspection
- Static generation and decay where display electronics require ESD control
- Dimensional stability and edge behavior through converting and shipment
Для значений нужны метод и утверждённая редакция.
Типичные значения помогают подбору; контролируемые пределы задаёт утверждённая TDS.
ПараметрТипичное значение / диапазонКонтроль
OpticsTransmission and haze by gradeMeasure on the complete laminate
Release / peelGrade- and side-specificState substrate, dwell, speed and angle
Static controlSurface and adhesive-side values by gradeVerify after converting
Thickness / colorGrade-specific base or laminate thickness and colorState whether protection and release liners are included
Типичные значения не являются спецификацией. Окончательные пределы определяются утверждённой TDS ECLEAR и валидацией заказчика.
Вопросы инженеров перед испытанием на линии.
До заказа образца определите функцию материала, интерфейсы и окно процесса.
Can one protection film cover every display surface?+
No. Bare glass, coated glass, polarizer, matte film and optical-sheet surfaces have different surface energy and damage sensitivity. Each interface and removal step needs qualification.
Why are release values not compared as a single number?+
Release force changes with the reference adhesive, dwell, temperature, peel angle, speed and liner orientation. A useful comparison must use the same complete method.
Can ECLEAR recommend a grade from an application description alone?+
A first shortlist is possible, but a production recommendation requires the substrate, layer construction, equipment, process sequence, test method and acceptance criteria. ECLEAR normally moves from requirement definition to laboratory matching, samples, line trial and a frozen approved specification.
Are the values shown on this page guaranteed specifications?+
No. Website values and constructions are selection guidance. Guaranteed limits, test conditions, packaging and shelf life are controlled only by the latest ECLEAR-approved TDS, quality agreement and customer qualification record.
Где оценивается эта платформа.
Каждое применение требует проверки совместимости всей структуры и валидации линии.
ОКНО ПРОЦЕССА
Контролируемые параметры.
Фиксируйте полное окно процесса, а не только одно номинальное значение.
- Identify the protected surface, optical stack and exact removal point.
- Match release force to the adhesive chemistry, dwell and storage history.
- Control particles, static charge, web direction and liner-removal speed.
- Validate optics and cosmetic quality after die cutting, lamination and aging.
ВОПРОСЫ ДЛЯ ПОДБОРА
Какие данные нам нужны.
Эти сведения позволяют ECLEAR сузить выбор марки и составить план валидации.
- Q1Is the film a temporary protector, permanent anti-splinter layer or release liner?
- Q2What are the substrate, optical and surface-energy requirements?
- Q3Which side releases first and under what line conditions?
- Q4Are antistatic, PCR-content, air-venting or decorative-primer functions required?
Что должно выявить дисциплинированное испытание на раннем этапе.
Ранние проверки снижают риск масштабирования и ошибочного сравнения материалов.
!
Using release-force data without its reference tape and test method
!
Cropping, scratching or contaminating optical surfaces during conversion
!
Static discharge or high tear voltage at liner removal
!
Treating a family placeholder as a frozen production specification
Контролируемая техническая документация.
Запрашивайте актуальную редакцию для выбранной марки ECLEAR и области применения.
PDFИнформационный бюллетеньДоступно после проверки управления документамиЗапросить →PDFКраткая TDSДоступно после проверки управления документамиЗапросить →PDFSDS и пакет соответствияДоступно после проверки управления документамиЗапросить →
Типовые конструкции и концепции применения предназначены только для подбора материала. Наличие, структура, характеристики и режимы процесса зависят от марки и подчиняются актуальной утверждённой TDS ECLEAR, прикладным испытаниям и окончательной квалификации заказчика.
Связанные системы материалов.
Проверьте соседние материалы, взаимодействующие с продуктом в одной структуре или процессе.
ТЕХНИЧЕСКАЯ КОНСУЛЬТАЦИЯ
Начать проект ↗Проверяйте всю структуру, а не отдельный материал.
Сообщите подложку, конструкцию, процесс и критерии приёмки для точной рекомендации.